Chapter 3,Techniques in Cell Biology
Preparatory observe
put forward theoretics
Design control tests
Collect data
Explain results
Devise conclusion
Refer to knowledge
从整个生命科学的发展趋势看细胞生物学方法
分子水平 细胞水平
结构功能 细胞生命活动
分析 综合
功能基因组学研究是细胞生物学研究的基础与归宿
（ 生命科学研究的核心问题 ）
1.The Light Microscopy
Figure 3-1,Resolving power,Sizes
of cells and their components drawn
on a logarithmic scale,indicating
the range of objects that can be
readily resolved by the naked eye
and in the light and electron
microscopes,The following units of
length are commonly employed in
microscopy,μm (micrometer) = 10-
6 m nm (nanometer) = 10-9 m?
(?ngstr?m unit) = 10-10 m
Figure 3-2,Interference between light waves,When two light waves
combine in phase,the amplitude of the resultant wave is larger and the
brightness is increased,Two light waves that are out of phase partially
cancel each other and produce a wave whose amplitude,and therefore
brightness,is decreased,
Figure 3-3,Edge effects,The interference effects observed at high
magnification when light passes the edges of a solid object placed
between the light source and the observer,
Figure 3-4,Numerical aperture,The path of light rays passing through
a transparent specimen in a microscope,illustrating the concept of
numerical aperture and its relation to the limit of resolution,
Figure 3-5,Making tissue sections,How an embedded tissue is
sectioned with a microtome in preparation for examination in the
light microscope,
B,Preparation of specimen
Figure 3-7,The optical system of a modern fluorescence microscope,
A filter set consists of two barrier filters (1 and 3) and a dichroic (beam-
splitting) mirror (2),In this example the filter set for detection of the
fluorescent molecule fluorescein is shown,
C,Fluorescence Microscopy
Figure 3-8,Fluorescent dyes,The structures of fluorescein and
tetramethylrhodamine,two dyes that are commonly used for
fluorescence microscopy,Fluorescein emits green light,whereas the
rhodamine dye emits red light,
Figure 3-9,Fluorescence microscopy,Micrographs of a portion of the surface
of an early Drosophila embryo in which the microtubules have been labeled with an
antibody coupled to fluorescein (left panel) and the actin filaments have been labeled
with an antibody coupled to rhodamine (middle panel),In addition,the chromosomes
have been labeled with a third dye that fluoresces only when it binds to DNA (right
panel),At this stage,all the nuclei of the embryo share a common cytoplasm,and they
are in the metaphase stage of mitosis,The three micrographs were taken of the same
region of a fixed embryo using three different filter sets in the fluorescence microscope.
Figure 3-10,Two ways to obtain contrast in light microscopy,The stained portions
of the cell in (A) reduce the amplitude of light waves of particular wavelengths passing
through them,A colored image of the cell is thereby obtained that is visible in the
ordinary way,Light passing through the unstained,living cell (B) undergoes very little
change in amplitude,and the structural details cannot be seen even if the image is
highly magnified,The phase of the light,however,is altered by its passage through the
cell,and small phase differences can be made visible by exploiting interference effects
using a phase-contrast or a differential-interference-contrast microscope,
D,Phase-contrast or a
differential-interference-
contrast microscope
Figure 3-11,Four types of light microscopy,(A) The image of a
fibroblast in culture obtained by the simple transmission of light through
the cell,a technique known as bright-field microscopy,The other images
were obtained by techniques discussed in the text,(B) phase-contrast
microscopy,(C) Nomarski differential-interference-contrast microscopy,
and (D) dark-field microscopy,
Figure 3-12,Extending the limits of detection,Light-microscope images of
unstained microtubules that have been visualized by differential-interference-contrast
microscopy followed by electronic image processing,(A) The original unprocessed
image,(B) The final result of an electronic process that greatly enhances contrast and
reduces "noise." (Courtesy of Bruce Schnapp.)
E,Electronic image processing
Video-enhance(contrast) microscopy
Observing living specimens;
Greatly increase the contrast of an image so that
very small objects become visible.
Figure 3-13,The confocal microscope,This diagram shows that the basic arrangement
of optical components is similar to that of the standard fluorescence microscope except
that a laser is used to illuminate a small pinhole whose image is focused at a single
point in the specimen (A),Fluorescence from this focal point in the specimen is focused
at a second pinhole (B),Light from elsewhere in the specimen is not focused here and
therefore does not contribute to the final image (C),By scanning the beam of light
across the specimen,a very sharp two-dimensional image of the exact plane of focus is
built up that is not significantly degraded by light from other regions of the specimen,
F,The confocal
microscope
32.mov
GFP can be used
to study dynamic
processes as they
occur in a living
cell.
Figure 3-14,Comparison of conventional and confocal fluorescence
microscopy,These two micrographs are of the same intact gastrula-stage Drosophila
embryo that has been stained with a fluorescent probe for actin filaments,The
conventional,unprocessed image (A) is blurred by the presence of fluorescent
structures above and below the plane of focus,In the confocal image (B),this out-of-
focus information is removed,which results in a crisp optical section of the cell in the
embryo.
Figure 3-16,Limit of resolution of the electron microscope,Electron
micrograph of a thin layer of gold showing the individual files of atoms
in the crystal as bright spots,The distance between adjacent files of gold
atoms is about 0.2 nm (2?).
2,Electron microscope
I,Transmission Electron Microscopy
A,The comparison of the lens systems of LM
and TEM
Figure 3-17,Principal features of a light microscope,a transmission
electron microscope,and a scanning electron microscope,These
drawings emphasize the similarities of overall design,Whereas the lenses
in the light microscope are made of glass,those in the electron
microscope are magnetic coils,
A,Principal
Figure 3-18,Two common chemical fixatives used for electron
microscopy,The two reactive aldehyde groups of glutaraldehyde enable it to cross-
link various types of molecules,forming covalent bonds between them,Osmium
tetroxide is reduced by many organic compounds with which it forms cross-linked
complexes,It is especially useful for fixing cell membranes,since it reacts with the
C=C double bonds present in many fatty acids.
B,Specimen
Preparation for
Electron Microscopy
Chemical fixation
Specimen Preparation for Electron Microscopy
Thin Sectioning for
TEM
The wax sections,3-10um;
The Plastic ultrathin-
sections for TEM,40-50nm
Sections of LM,>5um;
Sections of TEM,<100nm
Figure 3-19,Diagram of the copper grid used to support the thin
sections of a specimen in the transmission electron microscope,
Thin sections
Figure 3-20,Electron micrograph of a root-tip cell stained with
osmium and other heavy metal ions,The cell wall,nucleus,vacuoles,
mitochondria,endoplasmic reticulum,Golgi apparatus,and ribosomes are easily seen,
Figure 3-21,Electron micrograph of a cell showing the location of a particular
enzyme (nucleotide diphosphatase) in the Golgi apparatus,A thin section of the cell
was incubated with a substrate that formed an electron-dense precipitate upon reaction
with the enzyme
Figure 3-63,Immunogold electron microscopy,Electron micrographs of an
insulin-secreting cell in which the insulin molecules have been labeled with anti-insulin
antibodies bound to tiny colloidal gold spheres,Most of the insulin is stored in the
dense cores of secretory vesicles; in addition,some cores are being degraded in
lysosomes.
Figure 3-22,Three-dimensional reconstruction from serial sections,
Single thin sections sometimes give misleading impressions,In this
example most sections through a cell containing a branched
mitochondrion will appear to contain two or three separate mitochondria,
Sections 4 and 7,moreover,might be interpreted as showing a mito-
chondrion in the process of dividing,The true three-dimensional shape,
however,can be reconstructed from serial sections,
II,Scanning electron microscope (SEM)
Images of surfaces can be obtained by SEM;
Critical-point drying;
Range,15－ 150,000 X,Resolution,5nm
Figure 3-23,Scanning electron microscopy,Scanning electron
micrograph of the stereocilia projecting from a hair cell in the inner ear
of a bullfrog (A),For comparison,the same structure is shown by
differential-interference-contrast light microscopy (B) and by thin-
section electron microscopy (C).
Figure 3-32,Cells in culture,Scanning electron micrograph of rat
fibroblasts growing on the plastic surface of a tissue-culture dish.
Figure 3-24,Electron micrographs of individual myosin protein molecules that
have been shadowed with platinum,Myosin is a major component of the contractile
apparatus of muscle,As shown here,it is composed of two globular head regions linked
to a common rodlike tail.
III,Metal Shadowing Allows Surface Features to Be Examined
Figure 3-25,Preparation of a
metal-shadowed replica of the
surface of a specimen,Note
that the thickness of the metal
reflects the surface contours of
the original specimen,
Figure 3-26,Freeze-fracture electron micrograph of the thylakoid membranes
from the chloroplast of a plant cell,These membranes,which carry out
photosynthesis,are stacked up in multiple layers,The largest particles seen in the
membrane are the complete photosystem II-a complex of multiple proteins.
IV,Freeze-Fracture and Freeze-Etch Electron Microscopy
Figure 3-27,Freeze-etch electron microscopy,The specimen is rapidly
frozen,and the block of ice is fractured with a knife (A),The ice level is
then lowered by sublimation in a vacuum,exposing structures in the cell
that were near the fracture plane (B),Following these steps,a replica of
the still frozen surface is prepared,and this is examined in a transmission
electron microscope,
Freeze –Fracture
Replication and
Freeze Etching
quick freeze deep
etching
Figure 3-28,Regular array of protein filaments in an insect muscle,
To obtain this image,the muscle cells were rapidly frozen to liquid helium temperature,
fractured through the cytoplasm,and subjected to deep etching,A metal-shadowed
replica was then prepared and examined at high magnification,(Courtesy of Roger
Cooke and John Heuser.)
Quick-freeze,deep-etch
electron microscopy of
processes in MAP2 (a),
MAP2C (b) or tau (c)
transfected Sf9 cells,and
microtubules
copolymerized in vitro
with either MAP2 (d) or
tau (e),
Figure 3-29,Electron micrograph of negatively stained actin filaments,Each
filament is about 8 nm in diameter and is seen,on close inspection,to be composed of a
helical chain of globular actin molecules,(Courtesy of Roger Craig.)
V,Negative Staining and Cryoelectron Microscopy Allow
Macromolecules to Be Viewed at High Resolution
Figure 10-31,The three-dimensional structure of a bacteriorhodopsin molecule,
The polypeptide chain crosses the lipid bilayer as seven a helices,The location of the
chromophore and the probable pathway taken by protons during the light-activated
pumping cycle are shown,When activated by a photon,the chromophore is thought to
pass an H+ to the side chain of aspartic acid 85 (pink sphere marked 85),Subsequently,
three other H+ transfers are thought to complete the cyclefrom aspartic acid 85 to the
extra-cellular space,from aspartic acid 96 (pink sphere marked 96) to the chromophore,
and from the cytosol to aspartic acid 96,(R,Henderson et al,J,Mol,Biol.213:899-929)
3,Isolating Cells and
Growing Them in Culture
Figure 3-31,A fluorescence-activated
cell sorter,When a cell passes through
the laser beam,it is monitored for
fluorescence,Droplets containing single
cells are given a negative or positive
charge,depending on whether the cell
is fluorescent or not,The droplets are
then deflected by an electric field into
collection tubes according to their
charge,Note that the cell concentration
must be adjusted so that most droplets
contain no cells and flow to a waste
container together with any cell clumps,
The same apparatus can also be used to
separate fluorescently labeled
chromosomes from one another,
providing valuable starting material for
the isolation and mapping of genes,
Figure 3-32,Cells in culture,Scanning electron micrograph of rat
fibroblasts growing on the plastic surface of a tissue-culture dish,
(Courtesy of Guenter Albrecht-Buehler.)
Figure 3-33,The production of hybrid cells,Human cells and mouse cells are fused
to produce heterocaryons,which eventually form hybrid cells,These particular hybrid
cells are useful for mapping human genes on specific human chromosomes because
most of the human chromosomes are quickly lost in a random manner,leaving clones
that retain only one or a few,The hybrid cells produced by fusing other types of cells
often retain most of their chromosomes.
4,The Fractionation and analysis for
cell’s contents
A,The technique of differential centrifugation
Step-by-step procedure for the purification of organelles by
differential centrifugation.
S=(dx/dt)/?2x
=1? 10-13sec.
Figure 3-34,The preparative ultracentrifuge,
Figure 3-35,Cell fractionation by
centrifugation,Repeated
centrifugation at progressively
higher speeds will fractionate
homogenates of cells into their
components,In general,the smaller
the subcellular component,the
greater is the centrifugal force
required to sediment it,Typical
values for the various centrifugation
steps referred to in the figure arelow
speed,1,000 times gravity for 10
minutes medium speed,20,000
times gravity for 20 minutes high
speed,80,000 times gravity for 1
hour very high speed,150,000 times
gravity for 3 hours
Figure 3-36,Comparison of
methods of velocity sedimentation
and equilibrium sedimentation,
Figure 3-37,The separation of small molecules by paper
chromatography,After the sample has been applied to one end of the paper (the
"origin") and dried,a solution containing a mixture of two or more solvents is allowed
to flow slowly through the paper by capillary action,Different components in the
sample move at different rates in the paper according to their relative solubility in the
solvent that is preferentially adsorbed onto the fibers of the paper,
B,Paper chromatography
Figure 3-38,The separation of molecules by column chromatography,The sample
is applied to the top of a cylindrical glass or plastic column filled with a permeable solid
matrix,such as cellulose,immersed in solvent,Then a large amount of solvent is
pumped slowly through the column and is collected in separate tubes as it emerges from
the bottom,Various components of the sample travel at different rates through the
column and are thereby fractionated into different tubes,
C,Column chromatography
Figure 3-39,Three types of matrices used for chromatography,In ion-exchange
chromatography (A) the insoluble matrix carries ionic charges that retard molecules of
opposite charge,Matrices commonly used for separating proteins are DEAE-cellulose,
which is positively charged,and CM-cellulose and phosphocellulose,which are
negatively charged,In gel-filtration chromatography (B) the matrix is inert but porous,
Molecules that are small enough to penetrate into the matrix are thereby delayed and
travel more slowly through the column,Beads of cross-linked polysaccharide (dextran
or agarose) are available commercially in a wide range of pore sizes,making them
suitable for the fractionation of molecules of various molecular weights,from less than
500 to more than 5 x 106,Affinity chromatography (C) utilizes an insoluble matrix that
is covalently linked to a specific ligand,such as an antibody molecule or an enzyme
substrate,that will bind a specific protein,
Figure 3-40,Protein purification by
chromatography,In this example a homogenate of
cells was first fractionated by allowing it to percolate
through an ion-exchange resin packed into a column
(A),The column was washed,and the bound proteins
were then eluted by passing a solution containing a
gradually increasing concentration of salt onto the top
of the column,Proteins with the lowest affinity for the
ion-exchange resin passed directly through the column
and were collected in the earliest fractions eluted from
the bottom of the column,The remaining proteins
were eluted in sequence according to their affinity for
the resinthose proteins binding most tightly to the resin
requiring the highest concentration of salt to remove
them,The fractions with activity were pooled and then
applied to a second,gel-filtration column (B),The
elution position of the still-impure protein was again
determined by its enzymatic activity and the active
fractions pooled and purified to homogeneity on an
affinity column (C) that contained an immobilized
substrate of the enzyme,
Figure 3-41,The detergent sodium dodecyl sulfate (SDS) and the reducing agent
beta-mercaptoethanol,These two chemicals are used to solubilize proteins for SDS
polyacrylamide-gel electrophoresis,The SDS is shown here in its ionized form,
D,SDS polyacrylamide-gel electrophoresis
Figure 3-42,SDS polyacrylamide-gel
electrophoresis (SDS-PAGE).
Electrophoresis
Figure 3-44,Separation of protein molecules by isoelectric focusing,
At low pH the carboxylic acid groups of proteins tend to be uncharged ( -COOH) and
their nitrogen-containing basic groups fully charged ( -NH3+),giving most proteins a net
positive charge,At high pH the carboxylic acid groups are negatively charged (-COO-)
and the basic groups tend to be uncharged ( -NH2),giving most proteins a net negative
charge,At its isoelectric pHa protein has no net charge since the positive and negative
charges balance,Thus,when a tube containing a fixed pH gradient is subjected to a
strong electric field in the appropriate direction,each protein species present will
migrate until it forms a sharp band at its isoelectric pH,as shown.
Figure 3-45,Two-dimensional polyacrylamide-gel electrophoresis,All the proteins
in an E,coli bacterial cell are separated in this gel,in which each spot corresponds to a
different polypeptide chain,Note that different proteins are present in very different
amounts,The bacteria were fed with a mixture of radioisotope-labeled amino acids and
the result was detected by auto-radiography,(Courtesy of Patrick O'Farrell.)
Figure 3-46,Western blotting or immunoblotting,The total proteins from
dividing tobacco cells in culture are first separated by two-dimensional polyacrylamide-
gel electrophoresis as shown in and their positions revealed by a sensitive protein stain
(A),The separated proteins on an identical gel were then transferred to a sheet of
nitrocellulose and incubated with an antibody that recognizes those proteins that,during
mitosis,are phosphorylated on threonine residues,The positions of the dozen or so
proteins that are recognized by this antibody are revealed by an enzyme-linked second
antibody (B),(From J.A,Traas et al.,Plant Journal2:723-732)
E,Western blotting or immunoblotting
Table 4-8 Some Reagents Commonly Used to Cleave Peptide
Bonds in Proteins
Amino Acid 1
Amino
Acid 2
Enzyme
Trypsin Lys or Arg any
Chymorypsin Phe,Trp,or Tyr any
V8 protease Glu any
Chemical
Cyanogen bromide Met any
2-Nitro-5-thiocyanobenzoate any Cys
Figure 3-47,Production of a peptide
map,or fingerprint,of a protein,
Here,the protein was digested with
trypsin to generate a mixture of
polypeptide fragments,which was then
fractionated in two dimensions by
electrophoresis and partition
chromatography,The pattern of spots
obtained is diagnostic of the protein
analyzed,
Figure 3-48,X-ray crystallography,(A) Protein crystal of ribulose
bisphosphate carboxylase,an enzyme that plays a central role in CO2 fixation during
photosynthesis,(B) X-ray diffraction pattern obtained from the crystal,(C) Simplified
model of the protein structure derived from the x-ray diffraction data,(A,courtesy of C,
Branden; B,courtesy of J,Hajdu and I,Andersson; C,adapted from original provided
by B,Furugren.)
5,Protein structure
A,X-ray crystallography
Figure 3-49,NMR spectroscopy,(A) An example of the data from an NMR
machine,This is a two-dimensional NMR spectrum derived from the carboxyl-terminal
domain of the enzyme cellulase,The spots represent interactions between hydrogen
atoms that are near neighbors in the protein and hence their distance apart,Complex
computing methods,in conjunction with the known amino acid sequence,enable
possible compatible structures to be derived,In (B) 10 structures,which all satisfy the
distance constraints equally well,are shown superimposed on one another,giving a
good indication of the probable three-dimensional structure,(Courtesy of P,Kraulis.)
B,NMR
spectroscopy
Figure 7-20,In situ hybridization for RNA localization in tissues,
Autoradiograph of a section of a very young Drosophila embryo that has been subjected
to in situ hybridization using a radioactive DNA probe complementary to a gene
involved in segment development,The probe has hybridized to RNA in the embryo,and
the pattern of autoradiographic silver grains reveals that the RNA made by the gene (ftz)
is localized in alternating stripes across the embryo that are three or four cells wide,At
this stage of development (cellular blastoderm),the embryo contains about 6000 cells,
(E,Hafen et al,Cell 37:833-841,1984.)
6,Tracing and Assaying Molecules Inside Cells
Figure 3-51,Electron-microscopic autoradiography,The results of a
pulse-chase experiment in which pancreatic beta cells were fed 3H-
leucine for 5 minutes followed by excess unlabeled leucine (the chase),
The amino acid is largely incorporated into insulin,which is destined for
secretion,After a 10-minute chase the labeled protein has moved from
the rough ER to the Golgi stacks (A),where its position is revealed by
the black silver grains in the photographic emulsion,After a further 45-
minute chase the labeled protein is found in electron-dense secretory
granules (B).(Courtesy of L,Orci,from Diabetes 31:538-565)
Figure 3-57,Visualizing intracellular Ca2+ concentrations using a fluorescent
indicator,The branching tree of dendrites of the Purkinje cell in the cerebellum
receives more than 100,000 synapses from other neurons,The output from the cell is
conveyed along the single axon seen leaving the cell body at the bottom of the picture,
This image of the intracellular calcium concentration in a single Purkinje cell was taken
using a low-light camera and the Ca2+-sensitive fluorescent indictor fura-2,The
concentration of free Ca2+ is represented by different colors,red being the highest and
blue the lowest,(Courtesy of D.W,Tank et al.)
Figure 3-58,Fluorescent analogue cytochemistry,Fluorescence
micrograph of the leading edge of a living fibroblast that has been injected with
rhodamine-labeled tubulin,The microtubules throughout the cell have incorporated the
labeled tubulin molecules,Thus individual microtubules can be detected and their
dynamic behavior followed using computer-enhanced imaging,as shown here,
Although the microtubules appear to be about 0.25 μm thick,this is an optical effect;
they are,in reality,only one-tenth this diameter,(Courtesy of P,Sammeh and G,Borisy.)
Figure 3-59,Methods to introduce a membrane-impermeant substance into a cell.
(A) the substance is injected through a micropipette,(B) the cell membrane is made
transiently permeable to the substance by disrupting the membrane structure with a
brief but intense electric shock,(C) membrane-bounded vesicles are loaded with the
desired substance and then induced to fuse with the target cells.
Figure 3-64,Indirect immunocytochemistry,The method is very
sensitive because the primary antibody is itself recognized by many
molecules of the secondary antibody,The secondary antibody is
covalently coupled to a marker molecule that makes it readily detectable,
Commonly used marker molecules include fluorescein or rhodamine
dyes,the enzyme horseradish peroxidase or colloidal gold spheres,and
the enzymes alkaline phosphatase or peroxidase,
Figure 3-65,Preparation of
hybridomas that secrete
monoclonal antibodies against a
particular antigen (X),The
selective growth medium used contains an
inhibitor (aminopterin) that blocks the
normal biosynthetic pathways by which
nucleotides are made,The cells must
therefore use a bypass pathway to
synthesize their nucleic acids,and this
pathway is defective in the mutant cell
line to which the normal B lymphocytes
are fused,Because neither cell type used
for the initial fusion can grow on its own,
only the hybrid cells survive.
7,Monoclonal Antibodies
8,Gene Knockout mice
Mario Capecchi (Late 1980s)
(University of Utah)
embryonic stem cells in inner
cell mass as target cells
1/104 cells undergo a process of
homologous recombination,
9,The technique for the take apart and gather up
of cell,and microscope manipulation
Preparation and reform of karyoplast and cytoplast
Transgenic animals and plants
Transgenic
mice
10 weeks
44g and 29g
THANKS!
Preparatory observe
put forward theoretics
Design control tests
Collect data
Explain results
Devise conclusion
Refer to knowledge
从整个生命科学的发展趋势看细胞生物学方法
分子水平 细胞水平
结构功能 细胞生命活动
分析 综合
功能基因组学研究是细胞生物学研究的基础与归宿
（ 生命科学研究的核心问题 ）
1.The Light Microscopy
Figure 3-1,Resolving power,Sizes
of cells and their components drawn
on a logarithmic scale,indicating
the range of objects that can be
readily resolved by the naked eye
and in the light and electron
microscopes,The following units of
length are commonly employed in
microscopy,μm (micrometer) = 10-
6 m nm (nanometer) = 10-9 m?
(?ngstr?m unit) = 10-10 m
Figure 3-2,Interference between light waves,When two light waves
combine in phase,the amplitude of the resultant wave is larger and the
brightness is increased,Two light waves that are out of phase partially
cancel each other and produce a wave whose amplitude,and therefore
brightness,is decreased,
Figure 3-3,Edge effects,The interference effects observed at high
magnification when light passes the edges of a solid object placed
between the light source and the observer,
Figure 3-4,Numerical aperture,The path of light rays passing through
a transparent specimen in a microscope,illustrating the concept of
numerical aperture and its relation to the limit of resolution,
Figure 3-5,Making tissue sections,How an embedded tissue is
sectioned with a microtome in preparation for examination in the
light microscope,
B,Preparation of specimen
Figure 3-7,The optical system of a modern fluorescence microscope,
A filter set consists of two barrier filters (1 and 3) and a dichroic (beam-
splitting) mirror (2),In this example the filter set for detection of the
fluorescent molecule fluorescein is shown,
C,Fluorescence Microscopy
Figure 3-8,Fluorescent dyes,The structures of fluorescein and
tetramethylrhodamine,two dyes that are commonly used for
fluorescence microscopy,Fluorescein emits green light,whereas the
rhodamine dye emits red light,
Figure 3-9,Fluorescence microscopy,Micrographs of a portion of the surface
of an early Drosophila embryo in which the microtubules have been labeled with an
antibody coupled to fluorescein (left panel) and the actin filaments have been labeled
with an antibody coupled to rhodamine (middle panel),In addition,the chromosomes
have been labeled with a third dye that fluoresces only when it binds to DNA (right
panel),At this stage,all the nuclei of the embryo share a common cytoplasm,and they
are in the metaphase stage of mitosis,The three micrographs were taken of the same
region of a fixed embryo using three different filter sets in the fluorescence microscope.
Figure 3-10,Two ways to obtain contrast in light microscopy,The stained portions
of the cell in (A) reduce the amplitude of light waves of particular wavelengths passing
through them,A colored image of the cell is thereby obtained that is visible in the
ordinary way,Light passing through the unstained,living cell (B) undergoes very little
change in amplitude,and the structural details cannot be seen even if the image is
highly magnified,The phase of the light,however,is altered by its passage through the
cell,and small phase differences can be made visible by exploiting interference effects
using a phase-contrast or a differential-interference-contrast microscope,
D,Phase-contrast or a
differential-interference-
contrast microscope
Figure 3-11,Four types of light microscopy,(A) The image of a
fibroblast in culture obtained by the simple transmission of light through
the cell,a technique known as bright-field microscopy,The other images
were obtained by techniques discussed in the text,(B) phase-contrast
microscopy,(C) Nomarski differential-interference-contrast microscopy,
and (D) dark-field microscopy,
Figure 3-12,Extending the limits of detection,Light-microscope images of
unstained microtubules that have been visualized by differential-interference-contrast
microscopy followed by electronic image processing,(A) The original unprocessed
image,(B) The final result of an electronic process that greatly enhances contrast and
reduces "noise." (Courtesy of Bruce Schnapp.)
E,Electronic image processing
Video-enhance(contrast) microscopy
Observing living specimens;
Greatly increase the contrast of an image so that
very small objects become visible.
Figure 3-13,The confocal microscope,This diagram shows that the basic arrangement
of optical components is similar to that of the standard fluorescence microscope except
that a laser is used to illuminate a small pinhole whose image is focused at a single
point in the specimen (A),Fluorescence from this focal point in the specimen is focused
at a second pinhole (B),Light from elsewhere in the specimen is not focused here and
therefore does not contribute to the final image (C),By scanning the beam of light
across the specimen,a very sharp two-dimensional image of the exact plane of focus is
built up that is not significantly degraded by light from other regions of the specimen,
F,The confocal
microscope
32.mov
GFP can be used
to study dynamic
processes as they
occur in a living
cell.
Figure 3-14,Comparison of conventional and confocal fluorescence
microscopy,These two micrographs are of the same intact gastrula-stage Drosophila
embryo that has been stained with a fluorescent probe for actin filaments,The
conventional,unprocessed image (A) is blurred by the presence of fluorescent
structures above and below the plane of focus,In the confocal image (B),this out-of-
focus information is removed,which results in a crisp optical section of the cell in the
embryo.
Figure 3-16,Limit of resolution of the electron microscope,Electron
micrograph of a thin layer of gold showing the individual files of atoms
in the crystal as bright spots,The distance between adjacent files of gold
atoms is about 0.2 nm (2?).
2,Electron microscope
I,Transmission Electron Microscopy
A,The comparison of the lens systems of LM
and TEM
Figure 3-17,Principal features of a light microscope,a transmission
electron microscope,and a scanning electron microscope,These
drawings emphasize the similarities of overall design,Whereas the lenses
in the light microscope are made of glass,those in the electron
microscope are magnetic coils,
A,Principal
Figure 3-18,Two common chemical fixatives used for electron
microscopy,The two reactive aldehyde groups of glutaraldehyde enable it to cross-
link various types of molecules,forming covalent bonds between them,Osmium
tetroxide is reduced by many organic compounds with which it forms cross-linked
complexes,It is especially useful for fixing cell membranes,since it reacts with the
C=C double bonds present in many fatty acids.
B,Specimen
Preparation for
Electron Microscopy
Chemical fixation
Specimen Preparation for Electron Microscopy
Thin Sectioning for
TEM
The wax sections,3-10um;
The Plastic ultrathin-
sections for TEM,40-50nm
Sections of LM,>5um;
Sections of TEM,<100nm
Figure 3-19,Diagram of the copper grid used to support the thin
sections of a specimen in the transmission electron microscope,
Thin sections
Figure 3-20,Electron micrograph of a root-tip cell stained with
osmium and other heavy metal ions,The cell wall,nucleus,vacuoles,
mitochondria,endoplasmic reticulum,Golgi apparatus,and ribosomes are easily seen,
Figure 3-21,Electron micrograph of a cell showing the location of a particular
enzyme (nucleotide diphosphatase) in the Golgi apparatus,A thin section of the cell
was incubated with a substrate that formed an electron-dense precipitate upon reaction
with the enzyme
Figure 3-63,Immunogold electron microscopy,Electron micrographs of an
insulin-secreting cell in which the insulin molecules have been labeled with anti-insulin
antibodies bound to tiny colloidal gold spheres,Most of the insulin is stored in the
dense cores of secretory vesicles; in addition,some cores are being degraded in
lysosomes.
Figure 3-22,Three-dimensional reconstruction from serial sections,
Single thin sections sometimes give misleading impressions,In this
example most sections through a cell containing a branched
mitochondrion will appear to contain two or three separate mitochondria,
Sections 4 and 7,moreover,might be interpreted as showing a mito-
chondrion in the process of dividing,The true three-dimensional shape,
however,can be reconstructed from serial sections,
II,Scanning electron microscope (SEM)
Images of surfaces can be obtained by SEM;
Critical-point drying;
Range,15－ 150,000 X,Resolution,5nm
Figure 3-23,Scanning electron microscopy,Scanning electron
micrograph of the stereocilia projecting from a hair cell in the inner ear
of a bullfrog (A),For comparison,the same structure is shown by
differential-interference-contrast light microscopy (B) and by thin-
section electron microscopy (C).
Figure 3-32,Cells in culture,Scanning electron micrograph of rat
fibroblasts growing on the plastic surface of a tissue-culture dish.
Figure 3-24,Electron micrographs of individual myosin protein molecules that
have been shadowed with platinum,Myosin is a major component of the contractile
apparatus of muscle,As shown here,it is composed of two globular head regions linked
to a common rodlike tail.
III,Metal Shadowing Allows Surface Features to Be Examined
Figure 3-25,Preparation of a
metal-shadowed replica of the
surface of a specimen,Note
that the thickness of the metal
reflects the surface contours of
the original specimen,
Figure 3-26,Freeze-fracture electron micrograph of the thylakoid membranes
from the chloroplast of a plant cell,These membranes,which carry out
photosynthesis,are stacked up in multiple layers,The largest particles seen in the
membrane are the complete photosystem II-a complex of multiple proteins.
IV,Freeze-Fracture and Freeze-Etch Electron Microscopy
Figure 3-27,Freeze-etch electron microscopy,The specimen is rapidly
frozen,and the block of ice is fractured with a knife (A),The ice level is
then lowered by sublimation in a vacuum,exposing structures in the cell
that were near the fracture plane (B),Following these steps,a replica of
the still frozen surface is prepared,and this is examined in a transmission
electron microscope,
Freeze –Fracture
Replication and
Freeze Etching
quick freeze deep
etching
Figure 3-28,Regular array of protein filaments in an insect muscle,
To obtain this image,the muscle cells were rapidly frozen to liquid helium temperature,
fractured through the cytoplasm,and subjected to deep etching,A metal-shadowed
replica was then prepared and examined at high magnification,(Courtesy of Roger
Cooke and John Heuser.)
Quick-freeze,deep-etch
electron microscopy of
processes in MAP2 (a),
MAP2C (b) or tau (c)
transfected Sf9 cells,and
microtubules
copolymerized in vitro
with either MAP2 (d) or
tau (e),
Figure 3-29,Electron micrograph of negatively stained actin filaments,Each
filament is about 8 nm in diameter and is seen,on close inspection,to be composed of a
helical chain of globular actin molecules,(Courtesy of Roger Craig.)
V,Negative Staining and Cryoelectron Microscopy Allow
Macromolecules to Be Viewed at High Resolution
Figure 10-31,The three-dimensional structure of a bacteriorhodopsin molecule,
The polypeptide chain crosses the lipid bilayer as seven a helices,The location of the
chromophore and the probable pathway taken by protons during the light-activated
pumping cycle are shown,When activated by a photon,the chromophore is thought to
pass an H+ to the side chain of aspartic acid 85 (pink sphere marked 85),Subsequently,
three other H+ transfers are thought to complete the cyclefrom aspartic acid 85 to the
extra-cellular space,from aspartic acid 96 (pink sphere marked 96) to the chromophore,
and from the cytosol to aspartic acid 96,(R,Henderson et al,J,Mol,Biol.213:899-929)
3,Isolating Cells and
Growing Them in Culture
Figure 3-31,A fluorescence-activated
cell sorter,When a cell passes through
the laser beam,it is monitored for
fluorescence,Droplets containing single
cells are given a negative or positive
charge,depending on whether the cell
is fluorescent or not,The droplets are
then deflected by an electric field into
collection tubes according to their
charge,Note that the cell concentration
must be adjusted so that most droplets
contain no cells and flow to a waste
container together with any cell clumps,
The same apparatus can also be used to
separate fluorescently labeled
chromosomes from one another,
providing valuable starting material for
the isolation and mapping of genes,
Figure 3-32,Cells in culture,Scanning electron micrograph of rat
fibroblasts growing on the plastic surface of a tissue-culture dish,
(Courtesy of Guenter Albrecht-Buehler.)
Figure 3-33,The production of hybrid cells,Human cells and mouse cells are fused
to produce heterocaryons,which eventually form hybrid cells,These particular hybrid
cells are useful for mapping human genes on specific human chromosomes because
most of the human chromosomes are quickly lost in a random manner,leaving clones
that retain only one or a few,The hybrid cells produced by fusing other types of cells
often retain most of their chromosomes.
4,The Fractionation and analysis for
cell’s contents
A,The technique of differential centrifugation
Step-by-step procedure for the purification of organelles by
differential centrifugation.
S=(dx/dt)/?2x
=1? 10-13sec.
Figure 3-34,The preparative ultracentrifuge,
Figure 3-35,Cell fractionation by
centrifugation,Repeated
centrifugation at progressively
higher speeds will fractionate
homogenates of cells into their
components,In general,the smaller
the subcellular component,the
greater is the centrifugal force
required to sediment it,Typical
values for the various centrifugation
steps referred to in the figure arelow
speed,1,000 times gravity for 10
minutes medium speed,20,000
times gravity for 20 minutes high
speed,80,000 times gravity for 1
hour very high speed,150,000 times
gravity for 3 hours
Figure 3-36,Comparison of
methods of velocity sedimentation
and equilibrium sedimentation,
Figure 3-37,The separation of small molecules by paper
chromatography,After the sample has been applied to one end of the paper (the
"origin") and dried,a solution containing a mixture of two or more solvents is allowed
to flow slowly through the paper by capillary action,Different components in the
sample move at different rates in the paper according to their relative solubility in the
solvent that is preferentially adsorbed onto the fibers of the paper,
B,Paper chromatography
Figure 3-38,The separation of molecules by column chromatography,The sample
is applied to the top of a cylindrical glass or plastic column filled with a permeable solid
matrix,such as cellulose,immersed in solvent,Then a large amount of solvent is
pumped slowly through the column and is collected in separate tubes as it emerges from
the bottom,Various components of the sample travel at different rates through the
column and are thereby fractionated into different tubes,
C,Column chromatography
Figure 3-39,Three types of matrices used for chromatography,In ion-exchange
chromatography (A) the insoluble matrix carries ionic charges that retard molecules of
opposite charge,Matrices commonly used for separating proteins are DEAE-cellulose,
which is positively charged,and CM-cellulose and phosphocellulose,which are
negatively charged,In gel-filtration chromatography (B) the matrix is inert but porous,
Molecules that are small enough to penetrate into the matrix are thereby delayed and
travel more slowly through the column,Beads of cross-linked polysaccharide (dextran
or agarose) are available commercially in a wide range of pore sizes,making them
suitable for the fractionation of molecules of various molecular weights,from less than
500 to more than 5 x 106,Affinity chromatography (C) utilizes an insoluble matrix that
is covalently linked to a specific ligand,such as an antibody molecule or an enzyme
substrate,that will bind a specific protein,
Figure 3-40,Protein purification by
chromatography,In this example a homogenate of
cells was first fractionated by allowing it to percolate
through an ion-exchange resin packed into a column
(A),The column was washed,and the bound proteins
were then eluted by passing a solution containing a
gradually increasing concentration of salt onto the top
of the column,Proteins with the lowest affinity for the
ion-exchange resin passed directly through the column
and were collected in the earliest fractions eluted from
the bottom of the column,The remaining proteins
were eluted in sequence according to their affinity for
the resinthose proteins binding most tightly to the resin
requiring the highest concentration of salt to remove
them,The fractions with activity were pooled and then
applied to a second,gel-filtration column (B),The
elution position of the still-impure protein was again
determined by its enzymatic activity and the active
fractions pooled and purified to homogeneity on an
affinity column (C) that contained an immobilized
substrate of the enzyme,
Figure 3-41,The detergent sodium dodecyl sulfate (SDS) and the reducing agent
beta-mercaptoethanol,These two chemicals are used to solubilize proteins for SDS
polyacrylamide-gel electrophoresis,The SDS is shown here in its ionized form,
D,SDS polyacrylamide-gel electrophoresis
Figure 3-42,SDS polyacrylamide-gel
electrophoresis (SDS-PAGE).
Electrophoresis
Figure 3-44,Separation of protein molecules by isoelectric focusing,
At low pH the carboxylic acid groups of proteins tend to be uncharged ( -COOH) and
their nitrogen-containing basic groups fully charged ( -NH3+),giving most proteins a net
positive charge,At high pH the carboxylic acid groups are negatively charged (-COO-)
and the basic groups tend to be uncharged ( -NH2),giving most proteins a net negative
charge,At its isoelectric pHa protein has no net charge since the positive and negative
charges balance,Thus,when a tube containing a fixed pH gradient is subjected to a
strong electric field in the appropriate direction,each protein species present will
migrate until it forms a sharp band at its isoelectric pH,as shown.
Figure 3-45,Two-dimensional polyacrylamide-gel electrophoresis,All the proteins
in an E,coli bacterial cell are separated in this gel,in which each spot corresponds to a
different polypeptide chain,Note that different proteins are present in very different
amounts,The bacteria were fed with a mixture of radioisotope-labeled amino acids and
the result was detected by auto-radiography,(Courtesy of Patrick O'Farrell.)
Figure 3-46,Western blotting or immunoblotting,The total proteins from
dividing tobacco cells in culture are first separated by two-dimensional polyacrylamide-
gel electrophoresis as shown in and their positions revealed by a sensitive protein stain
(A),The separated proteins on an identical gel were then transferred to a sheet of
nitrocellulose and incubated with an antibody that recognizes those proteins that,during
mitosis,are phosphorylated on threonine residues,The positions of the dozen or so
proteins that are recognized by this antibody are revealed by an enzyme-linked second
antibody (B),(From J.A,Traas et al.,Plant Journal2:723-732)
E,Western blotting or immunoblotting
Table 4-8 Some Reagents Commonly Used to Cleave Peptide
Bonds in Proteins
Amino Acid 1
Amino
Acid 2
Enzyme
Trypsin Lys or Arg any
Chymorypsin Phe,Trp,or Tyr any
V8 protease Glu any
Chemical
Cyanogen bromide Met any
2-Nitro-5-thiocyanobenzoate any Cys
Figure 3-47,Production of a peptide
map,or fingerprint,of a protein,
Here,the protein was digested with
trypsin to generate a mixture of
polypeptide fragments,which was then
fractionated in two dimensions by
electrophoresis and partition
chromatography,The pattern of spots
obtained is diagnostic of the protein
analyzed,
Figure 3-48,X-ray crystallography,(A) Protein crystal of ribulose
bisphosphate carboxylase,an enzyme that plays a central role in CO2 fixation during
photosynthesis,(B) X-ray diffraction pattern obtained from the crystal,(C) Simplified
model of the protein structure derived from the x-ray diffraction data,(A,courtesy of C,
Branden; B,courtesy of J,Hajdu and I,Andersson; C,adapted from original provided
by B,Furugren.)
5,Protein structure
A,X-ray crystallography
Figure 3-49,NMR spectroscopy,(A) An example of the data from an NMR
machine,This is a two-dimensional NMR spectrum derived from the carboxyl-terminal
domain of the enzyme cellulase,The spots represent interactions between hydrogen
atoms that are near neighbors in the protein and hence their distance apart,Complex
computing methods,in conjunction with the known amino acid sequence,enable
possible compatible structures to be derived,In (B) 10 structures,which all satisfy the
distance constraints equally well,are shown superimposed on one another,giving a
good indication of the probable three-dimensional structure,(Courtesy of P,Kraulis.)
B,NMR
spectroscopy
Figure 7-20,In situ hybridization for RNA localization in tissues,
Autoradiograph of a section of a very young Drosophila embryo that has been subjected
to in situ hybridization using a radioactive DNA probe complementary to a gene
involved in segment development,The probe has hybridized to RNA in the embryo,and
the pattern of autoradiographic silver grains reveals that the RNA made by the gene (ftz)
is localized in alternating stripes across the embryo that are three or four cells wide,At
this stage of development (cellular blastoderm),the embryo contains about 6000 cells,
(E,Hafen et al,Cell 37:833-841,1984.)
6,Tracing and Assaying Molecules Inside Cells
Figure 3-51,Electron-microscopic autoradiography,The results of a
pulse-chase experiment in which pancreatic beta cells were fed 3H-
leucine for 5 minutes followed by excess unlabeled leucine (the chase),
The amino acid is largely incorporated into insulin,which is destined for
secretion,After a 10-minute chase the labeled protein has moved from
the rough ER to the Golgi stacks (A),where its position is revealed by
the black silver grains in the photographic emulsion,After a further 45-
minute chase the labeled protein is found in electron-dense secretory
granules (B).(Courtesy of L,Orci,from Diabetes 31:538-565)
Figure 3-57,Visualizing intracellular Ca2+ concentrations using a fluorescent
indicator,The branching tree of dendrites of the Purkinje cell in the cerebellum
receives more than 100,000 synapses from other neurons,The output from the cell is
conveyed along the single axon seen leaving the cell body at the bottom of the picture,
This image of the intracellular calcium concentration in a single Purkinje cell was taken
using a low-light camera and the Ca2+-sensitive fluorescent indictor fura-2,The
concentration of free Ca2+ is represented by different colors,red being the highest and
blue the lowest,(Courtesy of D.W,Tank et al.)
Figure 3-58,Fluorescent analogue cytochemistry,Fluorescence
micrograph of the leading edge of a living fibroblast that has been injected with
rhodamine-labeled tubulin,The microtubules throughout the cell have incorporated the
labeled tubulin molecules,Thus individual microtubules can be detected and their
dynamic behavior followed using computer-enhanced imaging,as shown here,
Although the microtubules appear to be about 0.25 μm thick,this is an optical effect;
they are,in reality,only one-tenth this diameter,(Courtesy of P,Sammeh and G,Borisy.)
Figure 3-59,Methods to introduce a membrane-impermeant substance into a cell.
(A) the substance is injected through a micropipette,(B) the cell membrane is made
transiently permeable to the substance by disrupting the membrane structure with a
brief but intense electric shock,(C) membrane-bounded vesicles are loaded with the
desired substance and then induced to fuse with the target cells.
Figure 3-64,Indirect immunocytochemistry,The method is very
sensitive because the primary antibody is itself recognized by many
molecules of the secondary antibody,The secondary antibody is
covalently coupled to a marker molecule that makes it readily detectable,
Commonly used marker molecules include fluorescein or rhodamine
dyes,the enzyme horseradish peroxidase or colloidal gold spheres,and
the enzymes alkaline phosphatase or peroxidase,
Figure 3-65,Preparation of
hybridomas that secrete
monoclonal antibodies against a
particular antigen (X),The
selective growth medium used contains an
inhibitor (aminopterin) that blocks the
normal biosynthetic pathways by which
nucleotides are made,The cells must
therefore use a bypass pathway to
synthesize their nucleic acids,and this
pathway is defective in the mutant cell
line to which the normal B lymphocytes
are fused,Because neither cell type used
for the initial fusion can grow on its own,
only the hybrid cells survive.
7,Monoclonal Antibodies
8,Gene Knockout mice
Mario Capecchi (Late 1980s)
(University of Utah)
embryonic stem cells in inner
cell mass as target cells
1/104 cells undergo a process of
homologous recombination,
9,The technique for the take apart and gather up
of cell,and microscope manipulation
Preparation and reform of karyoplast and cytoplast
Transgenic animals and plants
Transgenic
mice
10 weeks
44g and 29g
THANKS!
