Date,2009-7-30
File,SSP1_04C.1
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
SIMATIC 管理器
Date,2009-7-30
File,SSP1_04C.2
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
从过程到项目
FB21
硬件软件项目管理过程
OB1
SIMATIC 管理器
I1.0 I1.1 Q4.0
Date,2009-7-30
File,SSP1_04C.3
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
STEP 7 工具
Date,2009-7-30
File,SSP1_04C.4
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
练习 4.1,检查 PG 接口
Date,2009-7-30
File,SSP1_04C.5
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
启动 SIMATIC 管理器或
Date,2009-7-30
File,SSP1_04C.6
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
SIMATIC 管理器菜单和工具栏标题栏菜单栏工具栏状态栏任务栏
Date,2009-7-30
File,SSP1_04C.7
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
SIMATIC 管理器中的工具条
Windows 95 符号 STEP 7 符号显示可访问的接点
S7 存储器卡下载 (到 PLC)
定义过滤器选择的过滤器仿真模块 (S7-PLCSIM)
Date,2009-7-30
File,SSP1_04C.8
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
STEP 7 项目结构
Date,2009-7-30
File,SSP1_04C.9
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
SIMATIC 管理器中离线 /在线
Date,2009-7-30
File,SSP1_04C.10
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
项目的存储位置
Date,2009-7-30
File,SSP1_04C.11
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
建立项目这里选择项目名，用
,OK”确认。
Date,2009-7-30
File,SSP1_04C.12
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
插入 S7 程序
Date,2009-7-30
File,SSP1_04C.13
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
插入 S7 块
Date,2009-7-30
File,SSP1_04C.14
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
STEP 7 帮助系统
Date,2009-7-30
File,SSP1_04C.15
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
STEP 7上下文帮助
Date,2009-7-30
File,SSP1_04C.16
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
标准库
Date,2009-7-30
File,SSP1_04C.17
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
练习 4.2,建立项目在这里输入项目名，用
,OK”确认
Date,2009-7-30
File,SSP1_04C.18
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
练习 4.3,插入 S7 程序
Date,2009-7-30
File,SSP1_04C.19
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
练习 4.4,插入 S7 块
Date,2009-7-30
File,SSP1_04C.20
SIMATIC S7
Siemens AG 2000,All rights reserved.
Information and Training Center
Know ledge for Automation
练习 4.5,CPU 存储器复位手动要 求存储器复 位执 行存储器复 位
1,把模式选择器放在
,STOP”位置
2,把模式选择器保持在,MRES”位置，
直到,STOP”
指示灯闪烁两次
(慢速 )
3,松开模式选择器
(自动回到,STOP”
位置 )
1,把模式选择器保持在,MRES”位置
（ STOP指示灯快速闪烁）
2,松开模式选择器
(自动回到,STOP”
位置 )
通过 PG
1,把模式选择器放在
,RUN-P”位置
2,菜单选择：
PLC -> Operating
Mode -> Stop
3,菜单选择：
PLC -> Clear/Reset
1,点击,OK”按钮确认存储器复位插入存储器卡后
1,把模式选择器放在
,STOP”位置
2,插入存储器卡
3.,STOP”灯慢速闪烁
1.把模式选择器保持在,MRES”位置
（ STOP指示灯快速闪烁）
2,松开模式选择器
(自动回到,STOP”
位置 )