3.064 Quiz 10/10/03
Sample questions
1. What is the,glass transition temperature” of a polymer? How can it
be measured? What molecular characteristics determine its value?
Illustrate by giving the chemical structure and Tg for polyethylene,
polyvinyl chloride and polystyrene.
2. What is the,glass transition temperature” of a polymer? How can it
be measured? What molecular characteristics determine its value?
Illustrate by giving the chemical structure and Tg for polyethylene,
polypropylene and polystyrene.
3. Draw the chemical formulas for polydimethyl siloxane,polyethylene,
polypropylene,polyvinyl chloride,polymethyl methacrylate,
polystyrene,polytetrafluoroethylene,polycarbonate,and polyethylene
terephthalate.
4. For each of the previous polymers,give the approximate glass
transition temperature,the percent crystallinity,and some principal
market applications.
5. Describe the role of polarity and topology on glass transition
temperature.
6. Draw plots of modulus versus temperature for various polymers:
amorphous,crystalline,crosslinked,non-crosslinked,Explain why
the plots have the shape they do.
7. Why is Teflon so good as a non-stick surface? How do they get it to
stick to the pan?
8. Explain what a spherulite is,and describe the effect of spherulite
size on polymer mechanical properties.
9. Explain how the molecular weight distribution of a polymer can be
measured by size exclusion chromatography,Sketch the form of the
raw data obtained from this instrument,and state how the number and
weight average molecular weight can be obtained from the data.
10,Explain the effect of molecular weight on tensile strength and
viscosity,Give an example of an application of an ultra-high
molecular weight polymer.
11,Define the Hermann’s orientation function,and explain how it can be
determined experimentally,Derive its value for uniaxial,
transverse,and random orientation.
12,Outline some methods for obtaining ultra-high orientation in
polymers (e.g,Kevlar,Spectra).
13,Define the following elastic constants,Poisson’s ratio,tensile
modulus and compliance,and shear modulus and compliance,Give
approximate values for the Poisson’s ratio and tensile modulus of
both glassy and rubbery polymers.
14,Why does rubber have to be crosslinked to be useful (usually)? How
is this done (show the chemistry).
15,Only cis-1,4 polymerization of butadiene produces a good elastomer.
What are some other possibilities,and why do they not make good
rubbers? How do we get the form we want?
16,Outline the concepts involved in the kinetic theory of rubber
elasticity.
17,Give the relation for strain energy in a rubber as a function of the
extension ratios,and from this develop equations governing the
extension ratio and the applied load for uniaxial tension,equal
biaxial tension,and unequal biaxial tension.
18,Develop an expression for the radius of a spherical rubber balloon
as a function of the internal pressure.
19,Consider two spherical rubber balloons,initially identical,One is
inflated to
λ
r
= 2,the other to
λ
r
= 3,What happens when the
balloons are connected at their necks so that air can flow from one
to the other? (Just a qualitative description,based on the,rubber
elastic” curve below.)
20,Give the relation for strain energy in a rubber as a function of the
extension ratios,and from this develop equations governing the
extension ratio and the engineering stress for uniaxial tension.
21,Draw plots of modulus versus temperature for various polymers:
amorphous,crystalline,crosslinked,non-crosslinked,Explain why
the plots have the shape they do,For the three-element spring-
dashpot model below:
(a) Sketch the relaxation and compliance functions G
rel
(t) and J
crp
(t)
conceptually,without recourse to equations,
(b) Develop the differential equation for the model,and solve it for
relaxation G
rel
(t),
(c) Derive (or at least set up) the expression for the complex
modulus of the model,
22,Explain the significance of the terms,complex modulus,”,storage
modulus,”,loss modulus.”
23,What is the rationale for claiming that the presence of a low-
temperature loss peak is a necessary and sufficient condition for
good room-temperature impact strength?
Sample questions
1. What is the,glass transition temperature” of a polymer? How can it
be measured? What molecular characteristics determine its value?
Illustrate by giving the chemical structure and Tg for polyethylene,
polyvinyl chloride and polystyrene.
2. What is the,glass transition temperature” of a polymer? How can it
be measured? What molecular characteristics determine its value?
Illustrate by giving the chemical structure and Tg for polyethylene,
polypropylene and polystyrene.
3. Draw the chemical formulas for polydimethyl siloxane,polyethylene,
polypropylene,polyvinyl chloride,polymethyl methacrylate,
polystyrene,polytetrafluoroethylene,polycarbonate,and polyethylene
terephthalate.
4. For each of the previous polymers,give the approximate glass
transition temperature,the percent crystallinity,and some principal
market applications.
5. Describe the role of polarity and topology on glass transition
temperature.
6. Draw plots of modulus versus temperature for various polymers:
amorphous,crystalline,crosslinked,non-crosslinked,Explain why
the plots have the shape they do.
7. Why is Teflon so good as a non-stick surface? How do they get it to
stick to the pan?
8. Explain what a spherulite is,and describe the effect of spherulite
size on polymer mechanical properties.
9. Explain how the molecular weight distribution of a polymer can be
measured by size exclusion chromatography,Sketch the form of the
raw data obtained from this instrument,and state how the number and
weight average molecular weight can be obtained from the data.
10,Explain the effect of molecular weight on tensile strength and
viscosity,Give an example of an application of an ultra-high
molecular weight polymer.
11,Define the Hermann’s orientation function,and explain how it can be
determined experimentally,Derive its value for uniaxial,
transverse,and random orientation.
12,Outline some methods for obtaining ultra-high orientation in
polymers (e.g,Kevlar,Spectra).
13,Define the following elastic constants,Poisson’s ratio,tensile
modulus and compliance,and shear modulus and compliance,Give
approximate values for the Poisson’s ratio and tensile modulus of
both glassy and rubbery polymers.
14,Why does rubber have to be crosslinked to be useful (usually)? How
is this done (show the chemistry).
15,Only cis-1,4 polymerization of butadiene produces a good elastomer.
What are some other possibilities,and why do they not make good
rubbers? How do we get the form we want?
16,Outline the concepts involved in the kinetic theory of rubber
elasticity.
17,Give the relation for strain energy in a rubber as a function of the
extension ratios,and from this develop equations governing the
extension ratio and the applied load for uniaxial tension,equal
biaxial tension,and unequal biaxial tension.
18,Develop an expression for the radius of a spherical rubber balloon
as a function of the internal pressure.
19,Consider two spherical rubber balloons,initially identical,One is
inflated to
λ
r
= 2,the other to
λ
r
= 3,What happens when the
balloons are connected at their necks so that air can flow from one
to the other? (Just a qualitative description,based on the,rubber
elastic” curve below.)
20,Give the relation for strain energy in a rubber as a function of the
extension ratios,and from this develop equations governing the
extension ratio and the engineering stress for uniaxial tension.
21,Draw plots of modulus versus temperature for various polymers:
amorphous,crystalline,crosslinked,non-crosslinked,Explain why
the plots have the shape they do,For the three-element spring-
dashpot model below:
(a) Sketch the relaxation and compliance functions G
rel
(t) and J
crp
(t)
conceptually,without recourse to equations,
(b) Develop the differential equation for the model,and solve it for
relaxation G
rel
(t),
(c) Derive (or at least set up) the expression for the complex
modulus of the model,
22,Explain the significance of the terms,complex modulus,”,storage
modulus,”,loss modulus.”
23,What is the rationale for claiming that the presence of a low-
temperature loss peak is a necessary and sufficient condition for
good room-temperature impact strength?
