Military and Commercial Cargo
Mission Needs
Presentation to Massachusetts Institute of Technology
Subject 16.886 Air Transportation System Architecting
2/26/04
Blaine K. Rawdon, Boeing Phantom Works
Introduction
? The cargo world attempts to solve a very complex
mission (problem)
? This presentation outlines the elements of the problem
but does not define a specific mission
? I have been trying to understand this subject for a few
years now
– I may only be a few weeks ahead of you (if that)!
? This presentation is non-linear
– Requires integration by the student after the fact…
? Military and commercial needs are similar in structure
– Widely different values
– Military values very dependent on situation
General Problem
? Object of the game: Devise a goods creation and
distribution system that creates greater value than it
costs
– Measure of merit varies
? Elements of the system include:
– Creation of the goods (manufacturing, mining, farming)
– Distribution
–Customers
General Solution
? Provides overall production/transport architecture to
maximize an economic measure
? This optimization results in the need for global
distribution of goods
– System seeks a balance between production and transport
costs:
? Low-cost or expert labor
? Mass production
? Product type consolidation (cars in Detroit, movies in LA)
? Farmland
? Proximity to market
? Good transport system access
?Etc
? Production and distribution are a linked system
Transport Problem
? The problem pertains to the distribution of non-human
objects (not electronic information)
– Humans are “self-loading cargo” and are a special case not
addressed here
? Chief difference between people and cargo is that people’s time is
generally much more valuable than cargo’s
– Transoceanic transport:
? Cargo: 99% ship, 1% air (by weight)
? People: 1% ship, 99% air (approximately)
– As a result, cargo systems are much different than passenger systems
? Addressing the transport problem in isolation from
production, the object is to obtain the lowest total cost of
transport
Total Distribution Cost
? Object of logistics systems is to minimize Total
Distribution Cost (TDC)
? TDC is the total cost of transporting goods
– Sum of cost of transport and cost of holding inventory
? Cost of transport is fees paid to carriers (ship, truck, etc)
? Annual cost of inventory is typically a fraction of the
value of the inventory
– This fraction is called “Inventory Carrying Cost”
? Typical fraction is 25%, but depends heavily on actual goods, timing
– Diamonds have low ICC, food has high ICC
? Consists of interest, depreciation, taxes, insurance, losses,
warehouses
Depreciation
? Depreciation is the most powerful and variable factor in ICC
? Depreciation refers to loss of potential value over time
? Depreciation may not be linear at all
– Seasonal variation
? If you get the air conditioners in one month late they may be on the shelves for 10
months – very expensive
? Lots of stuff is seasonal!
– Spoilage
? Food is worth less than nothing after it spoils
? Depreciation may pertain to loss of value in the larger system, not just the
cargo proper
– Airplane on ground, factory halted, troops die, etc
? Obsolescence and Hits
– Rapid technical change can cause high depreciation
? Michael Dell says his computers depreciate 1%/week!
– Inability to deliver a hit product will result in a loss of sales
– Military version of obsolescence and hits pertains to war
? Value of time can be very, very great in wartime
Cost of Transport
? Cost of transport is split into two parts:
– Direct operating cost
– Indirect operating cost
? Direct operating cost pertains to vehicle operation
– Fuel, crew, vehicle depreciation, maintenance, etc
? Indirect operating cost pertains to other costs
– Sales, cargo handling, administration, profit, etc
? Sum of direct and indirect operating costs is “cargo rate”
2002 Cargo Rates
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
Great Circle Distance (nm)
A
i
r
and O
c
ean C
a
r
g
o R
a
t
e
(
$
/
t
on-
nm
)
on G
r
eat
C
i
r
c
l
e
B
a
si
s
$0.025/ton-nm + $25/ton
(= $0.025 + $0.008 per ton-mile @ 3000 nm)
$0.18/ton-nm + $450/ton
(=$0.18 + $0.15 per ton-mile @ 3000 nm)
Aircraft
Container Ships
Comments on Cargo Rates
? Rates decline with range
– Much of indirect operating cost is independent of range
? Cargo handling, sales costs don’t depend on range
– So indirect cost per mile is less at greater ranges
? Ships are much less expensive than airplanes
– Ships are very efficient: L/D ~400
– Ships indirect costs are much less than airplane’s
? Large containers, mechanized loading
? Trend curves can be approximated by a simple formula
– Rate = cost/ton-nm + cost/ton
? Cost/nm can be thought of as DOC
? Fixed cost can be thought of as IOC
? Scatter in rates due to two factors
– Asymmetrical demand (east versus west for instance)
– Airplane main deck pays full rate, belly cargo rides for ~IOC,
Total Distribution Cost
TDC = (cargo rate * tons * nautical miles) + (time * cargo value * ICC)
so
TDC/ton-nm = cargo rate + (1/speed * cargo value/pound * ICC * 0.2283)
Where units are $, tons, nautical miles, knots
Total Distribution Cost
? Plot shows relationship between
value, ICC, TDC and speed
– For three vehicle systems
? Y-intercept is cargo rate, slope is
proportional to 1/speed
– Note that speed is not vehicle
speed alone, but entire supply
chain speed. Very important!
? Line for WIG is speculative
? Fast, intermediate-cost vehicles
can provide lower TDC for some
types of goods
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0 5 10 15
Value per Pound x Inventory Carrying Cost
($/lb)
T
o
t
a
l
D
i
st
r
i
but
i
on C
o
st
($
/
t
o
n
-n
m)
Standard Air
Cargo
Ultra-large,
land-based
WIG
Ship
Check out this reference: B. K. Rawdon, Z. C. Hoisington, Air Vehicle Design for Mass-Market Cargo Transport, AIAA 2003-0555, 2003
Supply Chain
? The “supply chain” refers to all the steps in the transport
process in which the goods are “out of service”
– So ICC applies to all of the inventory in the supply chain
? In transit
? Waiting between transport modes
? At the origin being built up
? At the destination being broken down
? In the store until sold
– An alternate definition of supply chain may include all the time
your money is “out of service”
? Some companies pay for the goods before they are manufactured
Inventory
? Inventory is expensive
– Typically 25% of value per year
? Inventory performs several functions:
– Buffer between a relatively steady production and an intermittent
transport
– “Safety stock” to assure an acceptable level of service
(acceptable likelihood of delivery)
? A function of system schedule reliability
? Also a function of variability and predictability of demand
– Buffer to connect two asynchronous transport modes
– Buffer to build inventory sufficient for efficient transport
? Between transport modes
? There is room for improvement in reducing inventory
– Perfect knowledge would be a good start
Inventory Drivers
? Frequency of service
– More frequent service reduces inventory at origin and destination
– Reduces period between asynchronous transport modes
? Reliability of service from a schedule standpoint
– Vehicle may be late
– Vehicle may not be available (full)
– Reliable service permits reduced safety stock
? Uncertain ship availability drives shippers crazy
? Variability of demand
? Predictability of demand
? Supply chain architecture
Variability
? Variability in demand influences supply chain architecture
? Variability is roughly proportional to the square root of the quantity
involved.
– Large quantities provide proportionally less variability
? 10/100 versus 100/10,000 (10% versus 1%)
– This favors reduced product differentiation, centralized distribution
centers
? However:
– Customers prefer differentiated products
– Centralized distribution centers have longer delivery distances
? Architecture must balance quantity, differentiation and distance
– Compare warehouse store with corner hardware store
– Compare mail-order with local store
– Some organizations use different architecture within same system
? High-value goods centralized, low value goods dispersed
Predictability of Demand
? Suppliers attempt to match supply to demand at optimum price
– Some architectures force long lead times (time between order and delivery)
? This reduces predictability since market or competition may change in the meantime
? Note that lead times can be cumulative
– Many products are the sum of numerous separate products, sometimes serial
? Market serves as feedback for production
– Long lag time between production and market feedback reduces precision of
control
? Very expensive mistakes
? Exacerbated by seasonal aspect – cannot fine-tune over the long run
? Some architectures improve responsiveness despite long supply chains
– Restaurants: generalized, low-value inventory held until the last moment when
custom product is created
– Dell Computer: same as restaurant
– Last minute allocation: Mass order on ships, allocated to specific regions or
stores just before docking according to present demand
Vehicle Size
? In transport systems, bigger is usually more efficient
– Ships:
? Volume/wetted area; Reynolds number; Froude number
– Faster and more efficient
? More cargo per crew
– Airplanes:
? Volume/wetted area; Reynolds number
? More cargo per crew
? Structural penalty of large size (wing bending mostly) is offset by other
benefits (compact fuselage)
? However, large size implies lower schedule frequency
– Optimum system must balance transport cost reduction of larger vehicle
with reduced inventory of smaller vehicle
? Because airplanes generally carry goods with greater value or ICC, they will
tend to be smaller than ships
– As world traffic increases, vehicles tend to increase in size
Node Number
? Total Distribution Cost is influenced by the number of nodes (ports, distribution
centers, stores, etc)
– Fewer nodes result in more frequent service and/or larger vehicles
? In the case of ships, fewer ports means that the cargo must travel farther on more
expensive trucks or trains
– Number of ports must balance the value of frequent service and larger vehicles with the
increased cost of surface transport
? Casual observation indicates a tendency toward few, major ports
? In the case of airplanes, fewer airports means the cargo must travel farther in slower
surface vehicles
– Must balance value of frequency of service and vehicle size with slower delivery
– Note that for airliners there are approximately one zillion airports worldwide
? The number for cargo is much less because cost is more important than time
– Route structure design can improve schedule frequency by combining loads
? In the case of distribution centers, fewer, larger centers are more efficient and require
less safety stock (lower variability), but are farther from their customers
– Cargo transport into distribution centers is typically less expensive that cargo going out
? Packaging efficiency, variation due to quantity
? The size and/or number of nodes may increase over time as traffic increases
Supply Chain Speed
? Supply chain speed drives Total Distribution Cost (TDC)
– More important for goods with high value per pound, high
depreciation
? Supply chain speed driven by:
– Vehicle speed
– Supply chain architecture
– Vehicle size
? Optimum supply chain architecture driven by:
– Vehicle speed, size and cost
– Value and ICC of goods
– Distance between origin and destination
Alternative Supply Chain Architectures
Factory to Factory
Factory Factory
Via ship
Supply Chain
~5 wks
Factory Factory
Key
Input/output
Inventory
Manufacturing
Ground transport
Ocean transport
Air Transport
Via air
Supply Chain
~1 wk
Ship Time and Cost Profile
NYC to Rotterdam – a Direct, Best Case Route
0 20 40 60 80 100 120 140 160
Moving container from loading ramp to storage
Container waiting for pickup after stuffing
Loading container on road trailer
Road transport to port terminal
Waiting for admission to port terminal
Transfer from road trailer to stack
Waiting in stack
Unstacking and transfer to terminal trailer
Transfer/loading onto ship
Containership travel time (NY-Rotterdam)
Tranfer/unloading off ship
Transfer to stack
Waiting in stack
Tranfer from stack to road trailer
Clearance and inspection
Road transport, port terminal to inland depot
Unloading container at inland depot
Storage at inland depot
Moving container to consignee
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Time (hours)
Cost ($US)
Hours
Cost ($US)
Origin - New York
Destination - Rotterdam
Source: Cost of Operations and Time for Shipping a 40’ Container; in APEC’s Congestion Points Study, Phase III, Best Practices Manual and Technical Report, Volume 2 Sea
Transport, Feb. 1997, p. 105.
Move to back-up
Alternative Supply Chain Architectures
Factory to Store to Customers
DC
Stores
Customers
Loads by store
Factories (n)
Loads by product
~8 weeks
“Store for Stores”
~20 wks
International
Factories (n)
DC
Stores
Customers
Loads by store
Loads by store
~6 wks
“Domestic”
~3 days
“Cross-Dock”
Alternative Supply Chain Architectures
Factory to Store to Customers
DC
Stores
Customers
Loads by store
~4 weeks
“Store for Stores”
Factories (n)
International w/ Foreign DC
Loads by product
Factories (n)
DC
Stores
Customers
Loads by store
~3 days
Cross-Dock
at airport
International w/ Foreign Cross Dock
Loads by store
~10 wks
(0 hrs from
order)
~6 wks (0 hrs from order)
Alternative Supply Chain Architectures
Restaurant / Dell Computer Model
Factories (n)
Fridge
Customers
~1 week?
Low-value inventory
Restaurant
Loads by ingredient
~2 wks? (~30 minutes from order)
Kitchen
“Fridge”
Factories (n)
Loads by component
~3 wks? (4 days
from order?)
Dell Computer Model
~1 week?
Lower-value inventory
Alternative Supply Chain Architectures
Offshore Dell Computer Model
“Fridge”
Factories (n)
Loads by component
~3 wks? (5 days from order?)
Offshore Dell Computer Model
~1 week?
Lower-value inventory
Alternative Supply Chain Architectures
Foreign Cars
DC
Dealer
Customers
Loads by dealer
Factory
General, speculative load
2 weeks?
“Car lot for dealers”
~8 wks?
Can be 0, 1, or
10 weeks from
order
Foreign Cars w/ DC
Factory
Dealer
Customers
Load per dealer’s order
~6 wks?
Can be 0 or 8 wks
from order
Foreign Cars w/o DC
Alternative Supply Chain Architectures
Foreign Cars, Global “Mail” Order
Dealer
Customers
Load per customer’s order
Factory
~1 wk? (~2 wk from order?)
Foreign Cars Built to Order
Load per customer’s order
Factory
Customers
~1 wk (~1 wk from order)
Consumer Goods from Manufacturers Inventory
Some Observations
? The value of speed comes from:
– Reduced time in transit
– The ability to reorganize architecture
? It’s not just the long trip that hurts. It’s also the slow
feedback loop.
– Between demand and supply
– Seasonal or time-sensitive demand exacerbates this
? Fast transit can tighten the feedback loop
? Fast transit can permit customer to obtain goods from
greater distance with acceptable delay
– Global mail-order
More Observations
? It used to be that one went to a store or show to obtain
information about goods
– Information now flows for free via Internet
? Often one can find better info on web than in store
? This supports global mail order
? It may be that the best architecture combines more than
one system
– Slow and cheap plus fast, responsive and expensive
? The tweeter has less throw than the bass speaker
How to Determine Cargo Mission Needs
? Examine current production/transport/customer system in a field of
interest.
– Evaluate value and ICC of goods, cost of system
? Generate alternative system architectures
– Include production, transport and customer characteristics
? Generate alternative transport vehicles
? Evaluate alternative system architectures
– Primarily against total economic performance
– Consider applications of the architecture beyond your chosen field,
especially for the vehicle
– Consider the future
– Consider what competition can do to you
? Choose the best one
– This defines your mission
Some Potential Systems of Interest
? Military deployment
– Currently performed with transport and tanker airplanes, ships,
dispersed US bases, prepositioned materiel, forward bases and ports,
etc
? Transport of food
– Elements to consider:
? Wealthy northern hemisphere, poorer southern; offset seasons
? Perishability, seasonality increase ICC
? Factory to factory
– Serial buildup of lead times
? Car manufacture and delivery
– Current system appears to have large inventories, is seasonal
– Global manufacture may cause serial buildup of lead times
? Design, tooling, components, assembly, delivery
? Leads to over or under production, less advanced products
More Potential Systems of Interest
? Manufacture and delivery of consumer products
– Currently a wide mix of system architectures
? What about housing?
– Can you make houses in China and put them up in Kansas?
? What about health services?
– Can you have a roving specialist (or general) hospital?
? Example is Orbis, an eyesight hospital in a DC-10
Cargo Airplanes
? I suspect that your analysis will show that cargo
airplanes have a substantially different mission than
passenger airplanes
? In the past, commercial cargo airplanes were derived
from airliners to save development cost
– It may be now that the cargo market can support a purpose-built
cargo airplane
? Your analysis may show that a low cargo rate is more
important than speed
– This requires an emphasis on low DOC and IOC
– Note that speed is good for productivity and therefore DOC
? What airplane type provides the lowest cargo rate?
Questions?